The following cartridges, filters, and accessories are available for Survivair’s S-Series (threaded) Respirators. Comes in Standard, P100 and multicontaminant cartridge/filter combinations.

Choose from the 501 or 502 depending on cartridge and filter type required on the facepiece. For more information 3M.com/Occsafety online.

3M 6000 Series Cartridges and Filters are designed for use with 3M Facepieces with bayonet attachments including 6000 Series half and full facepieces, 7500 Series half facepieces, 7800 Series full facepieces, and FF-400 Series facepieces.

The 3M Particulate Filter 5N11, N95 is NIOSH approved and provides protection against certain non-oil containing aerosols. This P-series filter is appropriate for both oil and non-oil containing environments with extended time-use limitations. For use with 3M 6000, 7000, and FF-400 Series Facepieces.

3M Cartridge/Filters provide a high level of comfort and exceptional respiratory protection, and offer significant advantages over earlier stacked cartridge/filters.

North Safety Cartridges and Filters provide respiratory protection against a wide variety of industrial air contaminants.

The 3M™ Particulate Filter 2097, P100, with Nuisance Level Organic Vapor Relief is 3M recommended for ozone protection up to 10 times the Threshold Limit Value.

The 3M Particulate Filter 2091, P100 provides workers with versatile protection, exceptional filter efficiency, durability, economy and simplicity.

A wide range of filters and cartridges provide versatile protection for 3M 5000, 6000 and 7000 Series Facepieces and Respirators.

The GME Super Cartridge provides protection against ten specific gases and vapors simultaneously. Using a prefilter and a cover adds protection against fumes, mists, dusts, pesticides and paints.

These low-profile, flexible filters fit well under a welding hood and with other personal protective equipment.

The 3M™Particulate Filter 2071, P95 with Advanced Electret Media technology provides protection in environments where oil, and non-oil based particles are present.

Advantage 200 LS Respirator features a facepiece made from a new clear blue formulation of thermoplastic rubber. The new facepiece is 25% lighter and noticeably softer than the previous model.

The comfortable 2000 Series Half Mask is made of silicone that stays soft and pliable, even in extreme heat and cold.

Designed for workers who wear hard hats and need to communicate frequently. A unique head harness system allows wearer to drop the facepiece to his chest without removing his hard hat.

The soft, hypoallergenic facepiece of the 7700 features a contoured sealing flange for a comfortable, secure fit.

The reusable 6000 Series Half Facepiece does not require extra parts to attach the filters or cartridges directly to the facepiece.

The pliable, soft, textured sealing surfaces of the SoftFeel® facepieces on Comfo Classic Half Mask Respirators come from extensive research.

The 5500 Series Respirator is an economical, reusable respirator that is compatible with North cartridges, filters and accessories, including the Compact Air™ PAPR and the CF2000 Series Continuous Flow Airline Attachment and the BP1002 Series Backpack Adapters.

The Half Facepiece 7500 Series has state-of-the-art features that provide unsurpassed comfort.

The Survivair Opti-Fit Respirator combines a high level of performance with a very affordable price, offering features and accessories usually found only in full-face respirators costing twice as much.

The Advantage 3200 Twin-Port Respirator is designed to enhance worker performance by maximizing comfort and efficiency,

The low-maintenance, low-cost, durable Advantage 1000 Full Facepiece Respirator weighs about 40% less than conventional full facepiece respirators.

The 5400 Series Full Facepiece Air-Purifying Respirator offers the same protection as North’s top-of-the-line 7600 Series™, but at a more economical price. The face seal and nose cup are made from a thermoplastic elastomer (TPE), a lightweight, soft and pliable material that provides comfort and an excellent fit, and is resistant to alcohol, acids and bases. Hypoallergenic.

The lightweight 7600 Series Full Facepiece Respirator features a five-strap head harness with neck strap. The 7600's hard polycarbonate lens protects eyes and face while providing a full 200 degree field of vision with superior optics.

The 7800S Ultimate Reusable Facepiece is extremely versatile and can be used in several different ways, ranging from use as an air purifying respirator to a positive pressure supplied air respirator.

The 4000 Series features a single-curve, polycarbonate lens that provides an unobstructed, wide-angle view. Inside the facepiece, the antifog coating effectively reduces fogging to -25°F.

The 3M 6000 Series Full Facepiece is lightweight and well balanced. It features a unique center adapter which forces exhaled breath and moisture downward and combines with the Cool Flow™ exhalation valve to make breathing easy and reduce heat and moisture buildup.